Semua perangkat terhubung secara nirkabel
QCA IPQ4019 WiFi 5 ac Ceiling AP
AIR-MT1200
1200Mbps High Power Dual 2.4 & 5.8 GHz Outdoor CPE Expand your video surveillance range to 5KM
The AIR-MT1200 is a high-power industrial dual-band outdoor AI CPE, specifically designed for Point-to-Point and Point-to-Multi-Point connections. Leveraging the next-generation 802.11ac Wi-Fi standard, it delivers combined speeds of 300 Mbps on the 2.4 GHz band and 900 Mbps on the 5.8 GHz band. Equipped with one 10/100M LAN port and one Gigabit LAN port, the AIR-MT1200 is perfect for expanding video surveillance networks and enabling data transmission over distances up to 5 kilometers.
Key Features:
* AI-Enhanced A, B Automatic Networking: The AIR-MT1200 features AI-enhanced A, B automatic networking, allowing for seamless one-to-one or one-to-many connections without additional setup. A switch button pair enables easy switching between Point-to-Point and Point-to-Multi-Point modes, providing flexibility and adaptability to various deployment scenarios. The device also supports WDS networking for dual compatibility in video networks.
* Automatic Power Adjustment: This feature automatically adjusts power levels to adapt to environmental changes, ensuring smooth video transmission even at close ranges. It maintains consistent performance by dynamically managing power output.
* Video Transmission Protocol: Optimized for wireless video surveillance, the AIR-MT1200 supports dynamic burst for high-speed video transmission. It ensures smooth, uninterrupted video by enhancing the underlying wireless driver for improved stability and stronger anti-interference capabilities.
* Energy Saving and Environmental Protection: The AIR-MT1200 is designed with energy efficiency in mind, complying with national RF and radiation standards. It includes dynamic MIMO power-saving mode (DMPS) and automatic power-saving transmission (APSD), intelligently managing power consumption based on the terminal's performance needs.
* Easier Construction: The AIR-MT1200 simplifies long-distance network setups by eliminating the need for trenching and burying cables. Its wireless bridge method is quick, flexible, and cost-effective, allowing for easy relocation and reuse of equipment, minimizing unnecessary investment.
* Simple Installation and Maintenance: With support for a 24V POE power supply, the AIR-MT1200 ensures convenient installation and deployment. Its simplified construction process enhances safety and reliability, making setup and maintenance straightforward and efficient.
Specification:
Chipset MT7620A+MT7612E+JL2101
DRAM DDR2 64M Byte
FLASH 8M Byte
Interface 1 *10/100M LAN, 1 * 10/100/1000Mbps (Non-standard PoE).
Data rate 11a:54M,48M,36M,24M,18M,12M,9M,6Mbps
11b/g/n/ac:7.2M,14.4M,21.7M,28.9M,43.3M,57.8M,65M,72.2M,14.4M,28.9M,43.3M,
57.8M,86.7M,115.6M,130M,144.4Mbps,180Mbps,240Mbps.
270Mbps,300Mbps,360Mbp,400Mbps,520Mbps,585Mbp,650Mbps,780Mbps,866Mbps
Transfer method Direct Sequence Spread Spectrum （DSSS）
Modulation OFDM/BPSK/QPSK/CCK/DQPSK/DBPSK
Standard IEEE802.11ac IEEE802.11n,IEEE802.11a ,IEEE802.3u
Supporting CSMA/CA,TCP/IP,IPX/SPX,NetBEUI,DHCP,NDIS3,NDIS4,NDIS5
Frequency 5180～5825MHz 2412-2484MHz
Power ≤9W
Power POE 24V 1A
RF power @25℃±2dB 802.11a
6-24Mbps 23±2dBm
36-48Mbps 21±2dBm
54Mbps 20±2dBm
802.11n HT20
MCS 0-3 23±2dBm
MCS 4 21±2dBm
MCS 5 20±2dBm
MCS 6 20±2dBm
MCS 7 19±2dBm
802.11n HT40
MCS 0-3 21±2dBm
MCS 4 21±2dBm
MCS 5 20±2dBm
MCS 6 19±2dBm
MCS 7 18±2dBm
Sensitivity 802.11a
6Mbps ≤ 92dBm ； 54Mbps ≤ -76dBm
802.11n HT20 MCS 0 ≤ -86; MCS 7 ≤ -68 -68dBm
HT40 MCS 0 ≤ -83dBm; MCS 7 ≤ -65dBm
802.11ac 802.11ac(HT80): ≤-83dBm@MCS0；≤-58dBm@MCS9
Frequency Range Antenna 2.4~2.4835GHz 5180~5825MHz
Polarization direction Gain Vertical (horizontal 60°/vertical 30°) 16DBi
Management WEP-based management Support
Telnet , Serial Support
Safety MAC contral Support
Encryption Support WEP encryption 64/128bits,WPA,WPA2,802.1x
Working/storage environment Operating temperature -30～65℃
Storage temperature 0～40℃
Humidity (non-condensed) ≤95%（non-condensing）
